Welcome to MyBarobo

Search
Sorted 25 Projects by

 

2
Linkbot Lock Popper

Linkbot Lock Popper

These are attachments you can attach to a Linkbot-L to brute force solve a combination lock. These parts are all 3D printable and use standard #6-32 x .25" long screws you can find at the hardware store, or you can get them from McMaster. After yo...

Categories:
Linkbot-L
3D Models
3D Printed
Software
Source Code
Linux
Creator:
Graham Ryland
Created: 2013-06-07
Modified: 2014-11-21
1
4 inches gear

4 inches gear

This 4 inches diameter gear is designed by the UC Davis C-STEM Center. When two wheels, also of different diameter, are used together, motion can be transmitted from one Linkbot to another. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
6 inches gear

6 inches gear

This 6 inches diameter gear is designed by the UC Davis C-STEM Center. When two wheels, also of different diameter, are used together, motion can be transmitted from one Linkbot to another. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
Lego Mindstorms Wheel Connector

Lego Mindstorms Wheel Connector

This connector is designed by the UC Davis C-STEM Center. It can be used to connect Lego Mindstorms wheels to a Linkbot. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
3 inches link

3 inches link

This link is designed by the UC Davis C-STEM Center. When used together with other links, it makes up a mechanism to transmit motion from one Linkbot to another. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
7 inches link

7 inches link

This link is designed by the UC Davis C-STEM Center. When used together with other links, it makes up a mechanism to transmit motion from one Linkbot to another. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
Small Wheel

Small Wheel

Small wheel for the Linkbot

Categories:
Linkbot-I
Linkbot-L
Creator:
Adam Ruggles
Created: 2013-05-21
Modified: 2014-11-20
1
General Purpose Lego Mindstorms Connector

General Purpose Lego Mindstorms Connector

This connector is designed by the UC Davis C-STEM Center. When snapped into a Linkbot, Lego Mindstorms components can be connected to it. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
4 inches link

4 inches link

This link is designed by the UC Davis C-STEM Center. When used together with other links, it makes up a mechanism to transmit motion from one Linkbot to another. It can be printed in a 3D printer.

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-07-25
Modified: 2014-11-20
1
Square Snap

Square Snap

This square snap connector is designed by the UC Davis C-STEM Center. This connector allows two Linkbots to move in a stand up position. It can be printed in a 3D printer.  

Categories:
2D Drawing
Creator:
UCD C-STEM
Created: 2014-04-08
Modified: 2014-11-20